Solvent extraction of permanganates (Na, K) by 18-crown-6 ether from water into 1,2-dichloroethane: elucidation of an extraction equilibrium based on component equilibria

Ion-pair formation constants (K_MLA mol⁻¹ dm³) of Na⁺– and K⁺–18-crown-6 ether (18C6) complexes with MnO₄⁻ in water (w) were determined potentiometrically at 25 °C. Simultaneously, extraction constants (K_ex mol⁻² dm⁶) of the permanganates with 18C6 from w into 1,2-dichloroethane at 25 °C were obtained from the spectrophotometric determination of distribution ratios of the permanganates. These K_ex values were divided into K_MLA and other three component equilibrium constants and thereby extraction-selectivity and -ability were discussed in comparison with corresponding metal picrate–18C6 extraction systems reported before.     

Solvatochromism in Binary Solvent Mixtures by Means of a Penta‐tert‐butyl Pyridinium N‐Phenolate Betaine Dye

The solvatochromic behavior of a penta‐tert‐butyl prydinium N‐phenolate betaine dye was studied using UV‐visible spectrophotometry in several binary mixture solvents. The solvent polarity parameter, E_T (1) (kcal. mol^?1) was calculated from the position of the longest‐wavelength intramolecular charge transfer absorption band of this penta‐tert‐butyl betaine dye. For binary solvent mixtures, all plots of E_T (1) versus the mole fraction of a more polar component are nonlinear owing to preferential solvation of the probe by one component of the binary solvent mixture. In the computation of E_T (1) it was assumed that the two solvents mixed interact to form a common structure with an E_T (1) value not always intermediate between those of the two solvents mixed. The results obtained are explained by the strong synergism observed for some of the binary mixtures with strong hydrogen bond donors (HBD) solvents such as alcohols.     

Investigation on the Extraction Mechanism of Au（I） from Cyanide Solution with Quaternary Ammonium System

During the past decades, there has been a renewed interest in the application of solvent extraction to the recovery of Au (I) from cyanide solutions1,2. Among those various extractants, the amine extractants with the addition of organic phosphorus oxide as cosolvent have been widely investigated3,4. Various diluents and modifiers have been selected to optimize the extraction system so as to increase the loading capacity, improve the selectivity and/or reduce emulsification5. Quaternary amm…     

1,3-二氧戊环基LiCF3SO3电解液对锂硫电池正极材料单质硫的电化学性能影响

测试了二元和多元溶剂组分的1,3-二氧戊环基LiCF3SO3电解液的粘度、离子电导率和单质硫的溶解度. 研究结果表明, 由较强的给电子能力溶剂组成的低粘度电解液较容易提高单质硫的氧化还原反应活性和可逆性能, 有利于提高单质硫在2.10 V附近的低放电平台电位和放电比容量. DOL-DME LiCF3SO3电解液能够较好地改善单质硫电极的表面钝化层结构, 促进电活性物质离子扩散和降低界面电荷传递阻抗, 从而表现出很好的放电倍率特性. 在室温下充放电流密度分别为0.1和0.2 mA/cm2时, 单质硫的首次放电比容量为792 mA·h/g, 第29次放电比容量达到412 mA·h/g.     

A MORPHOLOGICAL STUDY OF POLY（DIVINYLBENZENE-co-ACRYLIC ACID） IN CROSSLINKING PRECIPITATION POLYMERIZATION

Divinylbenzene-80 （DVB-80） and polar monomer acrylic acid （AA） having hydrogen bonding at a total monomer loading of 5 vol% were precipitated-copolymerized in a variety of organic solvents with 2,2＇-azobis（isobutyronitrile） （AIBN） as initiator. The experiments were investigated from a two-dimensional matrix, i.e., the actual crosslinking degree of DVB varying from 0 to 80% and the solvent composition varying from 0 to 100% of toluene mixture with acetonitrile, when the mixture of acetonitrile and toluene was used as the reaction solvent. Under various reaction conditions, six distinct morphologies including soluble polymers, swellable microgels, coagulum, irregular microparticles, and nano-/micrometer microspheres were formed and the structures of these polymer architectures were described. A morphological map was utilized to discuss the effects of both crosslinking degree of DVB and composition of solvent on the transitions between morphology domains. The results demonstrated that the microspheres are formed by an internal contraction due to the marginal solvency of the continuous phase and the crosslinking of the polymer network through the covalent bonding from DVB as well as the interchain hydrogen-bonding between the carboxylic acid units.     

Evaluation of molten inorganic salt hydrates as reaction medium for the derivatization of cellulose

Molten inorganic salt hydrates are highly efficient solvents forcellulose. The carboxymethylation of the polymer dissolved in this new group ofcellulose solvents was investigated. The homogeneous carboxymethylation ofcellulose in molten LiClO₄3H₂O using sodiummonochloroacetate in the presence of NaOH is possible. The formation of CMC wasconfirmed by FT- Raman spectroscopy. Structure analysis by means of HPLC afterchain degradation showed the formation of CMC with a DS of 2 after a shortreaction time of 4 h. The derivatives exhibit a statisticaldistribution of substituents along the polymer chain if prepared in moltenLiClO₄3H₂O as solvent. A substituent distributioninthe order C-6 > C-2 C-3 for anhydroglucose units (AGU) was concludedfrom ¹H-NMR measurements. The synthesis of CMC in the swellingmediumLiClxH₂O (2 x 5) yields polymers with astatistical distribution of functional groups along the chain. The watercontentof the salt melts has a dramatic influence on the DS_CMC.     

Solvent effect on heats of protonation of some amines

The heats of protonation of n-pentylamine, dipentylamine, tributylamine and heats for the first protonation step of 1,8-diamino-3,6-dioxaoctan, diazacrownether 22 and cryptand 222 in pure acetonitril and propylene carbonate and of diazacrownether 22 and dibenzosubstituted ligand 22BB in water + acetonitrile mixtures have been measured at 298.15 K using calorimetric titrations. The values of the reaction enthalpies in the solvents as well as the data in aqueous and methanol solutions reported in literature are analysed in terms of the simple electrostatic model and thermodynamic parameters of transfer (solvation) of the reactants. Estimation of the electrostatic and covalent contributions to standard enthalpy of transfer of the reactions from water to non-aqueous and mixed solvents has been made.     

Thermodynamic parameters ΔΔH and ΔΔS as probes for the transition state in the reaction of N-phenyltriazolinedione with alkenes in nucleophilic solvents

The thermodynamic parameters, ΔΔH^# and ΔΔS^#, were determined for the interception of an intermediate, with the structural characteristics of an aziridinium imide, by nucleophilic solvents during the reaction of 2-methyl-2-butene with N-phenyltriazolinedione. The experimentally measured parameters were found to be in favor of an S_N2-‘like’ transition state and showed strong dependence on the bulkiness of the incoming molecule of the nucleophile-solvent.     

Sunlight assisted solvent free synthesis of tert-butylperesters

Abstract

A green and efficient methodology has been developed for the direct conversion of aryl aldehydes to the corresponding tert-butyl peresters. The reaction has been carried out in absence of any solvent and the sunlight is used as the green source of energy. In this reaction tetrabutylammonium iodide (TBAI) acts as the mild organo catalyst and tert-butyl hydroperoxide (TBHP) serve as the source of tert-butyl group.     

Coupling of flow injection wetting-film extraction without segmentation and phase separation to flame atomic absorption spectrometry for the determination of trace copper in water samples

A flow injection wetting-film extraction system without segmentor and phase separator has been coupled to flame atomic absorption spectrometry for the determination of trace copper. Isobutyl methyl ketone (MIBK) was selected as coating solvent and 8-hydroxyquinoline (oxine) as the chelating reagent. By switching of a 8-channel valve and alternative initiation of two peristaltic pumps, MIBK, sample solution containing copper chelate of oxine, and air-segment sandwiched eluting solution (1.0 mol l⁻¹ nitric acid) were sequentially aspirated into an extraction coil made of PTFE tubing of 360 cm length and 0.5 mm i.d. The formation of organic film in the wall of the extraction coil, extraction of the copper chelate into the organic film and back-extraction of the analyte into the eluting solution occurred consecutively when these zones aspirated into the extraction coil were propelled down the extraction coil by a carrier solution at a flow rate of 2 ml min⁻¹. After leaving the extraction coil, the concentrated zone was transported to the nebulizer at its free uptake rate for atomization. Under the optimized conditions, an enrichment factor of 43 and a detection limit of 0.2 μg l⁻¹ copper were achieved at a sample throughput rate of 30 h⁻¹. Eleven determinations of a standard copper solution of 60 μg l⁻¹ gave a relative standard deviation of 1.5%. Foreign ions possibly present in tap water and natural water did not interfere with the copper determination. The developed method has been successfully used to the determination of copper content of tap water and river water.